I have two fuji GA645zi that have started to show problems. My third camera is still ok but showing problems as well(light not working). I would like to fix them or have them fixed by someone (I am in Europe) camera 1 The problem is the flex cable at the hinge that is getting cut. I have lost almost all digits and the camera is not working as it should. The ribbon is cut and the camera can't understand if the door is opened or closed because the contacts switch at the back of the door are cut. I can't find a cable with the right pitch 0.9mm to bypass the ribbon. I have some experience in repairing but as far as I am aware FUJI does not sell spare parts. camera 2 The shutter is not firing. The camera focuses the first time the battery are inserted and fires but the leaf shutter does not open. What could it be?How could I fix it? Can these be fixed for a reasonable amount of money? Any ideas or advises on how to fix them? I have a third one that is working ok but don't know for how long. Any help, suggestion is appreciated. p.s For someone out there openin a camera is not a game!!Always discharge the capacitor that can be fatal or don't attempt to open, it's not a game!!