2 small questions:

Discussion in 'Darkroom Equipment' started by PanTomasz, Feb 17, 2013.

  1. PanTomasz

    PanTomasz Member

    Messages:
    7
    Joined:
    Jan 24, 2013
    Location:
    Belfast, NI
    Shooter:
    35mm
    ...and... TA DAAH.!
    The darkroom is completed, I managed to make it without leaving home or ordering things, so there is couple of shortcomings and I'm wondering if and how can they affect me printing (they can't stop me, for sure :smile:
    - outdated fixer for paper (powder, never opened, good 6 years or so :smile:
    - I have only 6x6 mixing box, and my idea is to mask it for 24x36 film, I think it's gonna work untill I get proper hardware. What You think dear APUGers? Will it work?
     
  2. Bertil

    Bertil Subscriber

    Messages:
    183
    Joined:
    Jul 23, 2007
    Location:
    Northern Sweden
    Shooter:
    Multi Format
    Shouldn't be a problem, I suppose, with outdated fix in powder form, but anyway after mixing easy to test with a piece of film (or a piece of exposed paper - should show no density in the developer after fixed and washed)
    Good luck with the rest!
    /Bertil
     
  3. Neal

    Neal Subscriber

    Messages:
    1,625
    Joined:
    Dec 3, 2004
    Location:
    Chicago, Wes
    Shooter:
    Multi Format
    Time to print. Don't bother masking unless it's a problem. I use the 4x5 box in my Omega for everything.

    Neal Wydra
     
  4. Slixtiesix

    Slixtiesix Subscriber

    Messages:
    1,117
    Joined:
    Jul 31, 2006
    Shooter:
    Medium Format
    Fixer should be okay, even after 6 years. Just test it with a piece of film. There is no need to mask the mixing box. I´ve printed 35mm with a 6x6 enlarger and never had a problem.
     
  5. Nicholas Lindan

    Nicholas Lindan Advertiser Advertiser

    Messages:
    2,386
    Joined:
    Sep 2, 2006
    Location:
    Cleveland, O
    Shooter:
    Multi Format
    With a larger-format mixing box you will loose a little bit of light intensity and possibly some lighting evenness. You may not notice either.

    You can get back some of the loss by painting the top surface of the negative carrier bright white or simply by covering the top surface with ink-jet paper. This will get the otherwise lost light to bounce back up into the mixing box.