Separate names with a comma.
Discussion in '35mm Cameras and Accessories' started by ebwitwicki, Dec 6, 2004.
What is the best way to clean a 35mm color slide?
Canned air and an anti-static "towel". That's what I use. If there are water marks I wet the neg/slide again with a little bit of photo-flo and let it dry again.
PEC-12 works great on slides with finger prints. Use the PEC pads or a soft cotton cleaning pad such as Webril.
I recently cleaned an 8x10 slide with PEC-12 and it worked beautifully. I had accidentally gotten some marks on it trying to scan it (long and boring story). The short version is that the marks were on the emulsion side. I used PEC-12 with some clean cotton gloves and managed to clean the marks from the picture. Phew!