8x10 Polaroid Land Processor

Discussion in 'Large Format Cameras and Accessories' started by Zebra, Mar 7, 2003.

  1. Zebra

    Zebra Member

    Messages:
    363
    Joined:
    Mar 7, 2003
    Location:
    Asheville, N
    Shooter:
    ULarge Format
    Hello All,

    I've just purchased an 8 x 10 Polaroid Land Processor and was wondering if anyone had a source for step by step instructions or user manual. The one I purchased came with two holders but no manual. Being new to the format as well as the polaroid process I realize this might be a simple process, however I would enjoy having some guidance as I jump headlong into this pool that hopefully has water in it. Any help would be greatly appreciated.
     
  2. bmac

    bmac Member

    Messages:
    2,156
    Joined:
    Sep 30, 2002
    Location:
    San Jose, CA
  3. Gustavo_Castilla

    Gustavo_Castilla Member

    Messages:
    890
    Joined:
    Sep 11, 2004
    Location:
    Bryan Texas
    Shooter:
    Large Format
    Last edited by a moderator: Feb 3, 2005
  4. ann

    ann Subscriber

    Messages:
    2,919
    Joined:
    Sep 10, 2002
    Shooter:
    35mm
    just called customer service at Polariod they will send you the infor.
     
  5. rbarker

    rbarker Member

    Messages:
    2,222
    Joined:
    Oct 31, 2004
    Location:
    Rio Rancho,
    Shooter:
    Multi Format
    What is often not immediately obvious with Polaroid 8x10 processors and holders, Zebra, is that there are two designs. The older 81-05 holders hinge on the narrow end, and don't require the loading tray. Some people apparently experienced problems with the 81-05, so the design was changed with the 81-06, that opens on the long side, like a book, and requires the loading tray on the processor. Thus, you'll want to determine which model you're using, so you get the correct set of instructions.
     
  6. Gustavo_Castilla

    Gustavo_Castilla Member

    Messages:
    890
    Joined:
    Sep 11, 2004
    Location:
    Bryan Texas
    Shooter:
    Large Format