Adding punch to enhanced red sensitivity films?

Discussion in 'Exposure Discussion' started by Kitten, Nov 7, 2010.

  1. Kitten

    Kitten Member

    Messages:
    5
    Joined:
    Nov 7, 2010
    Location:
    Mid-south
    Shooter:
    35mm
    Hello,
    I was wondering if anyone had ideas for adding punch when using enhanced red sensitivity films such as Rollei Retro 80S, Retro 100S, or similar films. I was thinking of using a 85A or 85B filter to add a little punch while not resorting to something as heavy handed as a 25A filter. What if any filters would you guys recommend to get the most out of these films.

    P.S. This is my first post so I'm sorry if I managed to stick it in the wrong forum, it seemed to fit best here.
     
  2. Sirius Glass

    Sirius Glass Subscriber

    Messages:
    20,581
    Joined:
    Jan 18, 2007
    Location:
    Southern California
    Shooter:
    Multi Format
    The 85A or 85B filter would probably allow too much shorter wavelength light in and that would mask the IR response. The film would then look like any other pan film with an orange filter.

    Steve
     
  3. totalamateur

    totalamateur Member

    Messages:
    142
    Joined:
    Oct 17, 2008
    Shooter:
    Medium Format
    I think probably the SFX gel filter would work well, I've had luck with it. I also use a 760Nm filter that's a bit too dark - makes things overly dreamy.

    Also, I get better results when I push the film a stop or so.

    Alternatively- Deep red and Blue theatrical lighting gels can be combined in varyying layers to increase or decrease IR filtration, might be a pain to stick over your lens, though. I prefer to gel a flash with an IR filter and shoot without a filter over the lens in lower light.
     
    Last edited by a moderator: Nov 9, 2010