Adox Vario Classic Fibre - Experiences?

Discussion in 'B&W: Film, Paper, Chemistry' started by Fraxinus, Mar 29, 2008.

  1. Fraxinus

    Fraxinus Member

    Messages:
    64
    Joined:
    Sep 1, 2005
    Location:
    Hertfordshir
    Shooter:
    Medium Format
    A disappointing evening in the darkroom upon discovering that the pack of Agfa MCC III 20x16 I had carefully preserved for many, many years turned out to be totally fogged. No idea how that could have happened, although the even overall fogging throughout the whole pack suggests something more than just light was at work.

    After drying my eyes and downing a strong cup of tea, I decided to try out a new box of Adox Vario Classic fibre base instead. I like the results, excellent rich blacks, and I wondered has anyone had much experience with this paper recently?

    Searching the forum pulls up mainly old posts comparing it to a few long-gone papers, but I'm interested to hear if anyone has done any safelight tests with it? As the guidance is 'red only', I switched safelight filters to a Kodak No.2 in a beehive over the sink and a Kodak 1A ceiling fitting some distance away. All seemed fine for a four minute development time, but I didn't do any thorough testing, hoping that someone may already have done that?

    Also, looking at the Adox page about this material, they give variable contrast filtration for Durst enlargers. Would this be the same for a De Vere dichroic head?
    Finally, has anyone used it with a Multigrade head and, if so, how does it respond to the Ilford filtration?

    Hoping that one of you may have the answers to the above. If not, then I feel a thorough testing work-out may be required next time I return to the dark side.
     
  2. JBrunner

    JBrunner Moderator Staff Member Moderator

    Messages:
    7,075
    Joined:
    Dec 14, 2005
    Location:
    Basin and Range Province
    Shooter:
    8x10 Format
    I used to get this paper from J&C, one of my all time favorite papers.:smile: If I could print on that and Polywarmtone, I'd be a happy camper. Deep red safe lights, always. I lament that I don't have a US source for it anymore.:confused::sad::mad: Hopefully Freestyle will decide to carry it soon, as they have some other ADOX papers.:smile::smile::smile::smile:
     
  3. Fraxinus

    Fraxinus Member

    Messages:
    64
    Joined:
    Sep 1, 2005
    Location:
    Hertfordshir
    Shooter:
    Medium Format
    Follow-up: the Adox Print

    I've been asked via PM to share the print made on Adox Fine Print Vario, so here it is.
    I'm not 100% pleased with the image, but the paper shows great promise, particularly in those shadow areas.

    Shot with a Fuji GW690III on Ilford Delta Pro 400, developed in ID11 1+1.
    Print on Adox Fine Print Vario Classic Glossy, Grade 4 filtration (80M on De Vere Dichroic), D163 1+3 for 4 minutes 20 deg C. Not toned - trying selenium with it on the next print run!
     

    Attached Files: