Agfa C66 original wiring scheme sought

Discussion in 'Darkroom Equipment' started by AJH, May 6, 2006.

  1. AJH

    AJH Member

    Messages:
    21
    Joined:
    Jul 31, 2005
    Shooter:
    35mm
    I have a C66 where the internal meter is disconnected.

    I would like to reconnect it and need to know how the green/white/yellow were connected to the ABC springlocked-points at the LP1 Main board.
    Also there is a modification where the mains and 12 V inlet/outlet are located. Seems the switching triac or such (mounted to the metal plate) was taken out of the loop.

    Has anybody got a picture or schematic of these.?

    Thanks!
     
  2. Ben Taylor

    Ben Taylor Member

    Messages:
    108
    Joined:
    Jun 12, 2003
    Location:
    Norwich, UK
    Shooter:
    Multi Format
    I still have the meter I removed from mine in one piece.

    I'm away from my darkroom for a couple of weeks, but I'll take a couple of photos of the wiring when I return, which should help you. I also think I might have had a photocopy of a wiring diagram at some point, don't know if it'd be any use but I try to dig it out for you.

    Ben.
     
  3. rmann

    rmann Subscriber

    Messages:
    292
    Joined:
    Mar 14, 2004
    Location:
    New York
    Shooter:
    4x5 Format
    I have a multipage repair printout - will scan and email it to you. I have a C66 that I converted to manual use a few years ago by removing the sensor/timer unit. Kept everything else and it works like a Durst (which it really is). Robert