AGFA-Gevaert Rapidoproint

Discussion in 'B&W: Film, Paper, Chemistry' started by bmac, Nov 18, 2002.

  1. bmac

    bmac Member

    Messages:
    2,156
    Joined:
    Sep 30, 2002
    Location:
    San Jose, CA
    I was recently given several boxes of AGFA-Gevaert Rapidoproint grades 1-3 in both 4X5 and 8X10. I have searched the web and have not been able to find any info on this paper. Anyone know when it was made / discontinued? I am going to run some tests on it, but am not expecting much. No idea on the storage conditions and age of it.

    Brian
     
  2. edbuffaloe

    edbuffaloe Member

    Messages:
    132
    Joined:
    Sep 22, 2002
    Location:
    Austin, Texa
    Found on the Web:

    Rapidoprint

    Rapidoprint is a unique negative acting reprographic system featuring high speed processing (dry to dry in 75 seconds), excellent image quality and low chemistry consumption.

    The Rapidoprint system requires itÂ’s own dedicated processor, the DD3700 or DD6400, which has a four-bath process of activator-fixer-wash-wash. Unfortunately these processors are no longer manufactured but can still be easily acquired through the second hand market and the films and chemistry are readily available. The processors require no plumbing or drainage connection.

    Rapidoprint films can be exposed in a contact frame with incandescent light or in the negative holder of a repro camera. It is ideal for line art or halftone reproduction from black and white photographs.

    The two films available are RA711p and RA716pm, the later being a matt based film for photopolymer or flexographic plates. Both films are available in a variety of sheet and roll sizes for convenience.

    A special, dedicated chemistry is required for the development of Rapidoprint film.
     
  3. bmac

    bmac Member

    Messages:
    2,156
    Joined:
    Sep 30, 2002
    Location:
    San Jose, CA
    Strange, I have boxes of paper, not film...
     
  4. edbuffaloe

    edbuffaloe Member

    Messages:
    132
    Joined:
    Sep 22, 2002
    Location:
    Austin, Texa
    Hmmm. Well, I did find the following information in a data sheet for Brovira Speed: "The developer substance incorporated in the emulsion of AGFA BROVIRA-SPEED paper also enables activator processes to be used (e.g. AGFA RAPIDOPRINT). " So, obviously, the Rapidoprint processor can process papers as well, but only if they are developer-incorporated.