Arduino controlled solenoid shutter

Discussion in 'Large Format Cameras and Accessories' started by Mainecoonmaniac, Nov 2, 2013.

  1. Mainecoonmaniac

    Mainecoonmaniac Subscriber

    Messages:
    3,959
    Joined:
    Dec 10, 2009
    Shooter:
    Multi Format
  2. AgX

    AgX Member

    Messages:
    11,921
    Joined:
    Apr 5, 2007
    Location:
    Germany
    Shooter:
    Multi Format
    Link is a dead-end for me at Flickr.
     
  3. Dan Fromm

    Dan Fromm Member

    Messages:
    4,134
    Joined:
    Mar 23, 2005
    Shooter:
    Multi Format
  4. Mainecoonmaniac

    Mainecoonmaniac Subscriber

    Messages:
    3,959
    Joined:
    Dec 10, 2009
    Shooter:
    Multi Format
    Ooh sorry about that. The user is kkado on Flickr.
     
  5. AgX

    AgX Member

    Messages:
    11,921
    Joined:
    Apr 5, 2007
    Location:
    Germany
    Shooter:
    Multi Format
  6. Ian Grant

    Ian Grant Subscriber

    Messages:
    18,034
    Joined:
    Aug 2, 2004
    Location:
    West Midland
    Shooter:
    Multi Format
    Have you tried this yourself Dan ?

    I have 3 electronic shutters and need to make controllers this winter.

    Ian
     
  7. Dan Fromm

    Dan Fromm Member

    Messages:
    4,134
    Joined:
    Mar 23, 2005
    Shooter:
    Multi Format
    Sorry, Ian, I haven't.

    I have just two Ilex electronic shutters.

    A #3 that was part of an oscilloscope camera with an integrated controller. I've never got around to cutting metal, reassembling the controller in a box, adding an inverter plus battery box for field use. Haven't measured the DC voltage the AC power supply puts out, multimeter died and hasn't been replaced yet. Don't really need it, there's an oscillo-Paragon in it (good for little) and I don't have any other cells that will fit the shutter. I've tried the thing out, it functions but runs at least one stop slow at all speeds (4, 2, 1, 1/2, ... , 1/125). I bought it because of the indicated 1/125 top speed, which is unbelievably fast for an Ilex electronic.

    And a sort of #00 Ilex electronic (badged OptoDynetics, threaded like a Compur #00 but with shorter tube than the 00 standard) that I've never hooked up to the controller. I have no idea whether the 'scope camera's controller's voltages are right for the little 'un.
     
  8. Ian Grant

    Ian Grant Subscriber

    Messages:
    18,034
    Joined:
    Aug 2, 2004
    Location:
    West Midland
    Shooter:
    Multi Format
    Thanks Dan, my electronic skills are rather rusty I've not really done much in the last 40 years :D I used a real genius when I needed controllers etc for machinery but have lost touch.

    There's plenty of quite nice electronic shutters which sell for very little and a lack of cheap off the shelf controllers although I can get half a second and longer controllers of the shelf for under £10/$16 just need to control the voltage.

    Ian