Beseler Audible Repeating Electronic Enlarging Timer

Discussion in 'Darkroom Equipment' started by jeffzeitlin, Nov 2, 2009.

  1. jeffzeitlin

    jeffzeitlin Subscriber

    Messages:
    59
    Joined:
    Jan 25, 2005
    Shooter:
    8x10 Format
    I have recently acquired one and I am interested in making a foot switch for it. Does anyone know what plug type and were I can purchase one for the foot switch activation?
     
  2. doughowk

    doughowk Subscriber

    Messages:
    1,764
    Joined:
    Feb 11, 2003
    Location:
    Jacksonville
    Shooter:
    Multi Format
    Jeff, the foot switch (#8179) is available, and an image of it including the plug at khb Photo looks the same as what I have - 3 flat prongs. The timer should prove very useful for Lodima paper, including flashing.
     
  3. Chan Tran

    Chan Tran Member

    Messages:
    2,303
    Joined:
    May 10, 2006
    Location:
    Aurora, IL
    Shooter:
    35mm
    if you want just the connector, I believe it's made by Cinch. Check out Cinch.com for the Jones / J Plug and Sockets. I am not sure it's the series 2400 or 300 you need to measure the size of the blade.
     
  4. dpurdy

    dpurdy Subscriber

    Messages:
    2,223
    Joined:
    Jun 24, 2006
    Location:
    Portland OR
    Shooter:
    8x10 Format
    I am on my third Beseler audible repeating timer but still using the footswitch I got with the first one 20 years ago. I use it all the time. Just thought I would throw that in.
     
  5. jeffzeitlin

    jeffzeitlin Subscriber

    Messages:
    59
    Joined:
    Jan 25, 2005
    Shooter:
    8x10 Format
    Just a note of thanks. I found the correct J plugs and ordered the same.