Beseler Dual Dichro Installation

Discussion in 'Darkroom Equipment' started by JHFlood, Feb 11, 2008.

  1. JHFlood

    JHFlood Member

    Messages:
    1
    Joined:
    May 26, 2006
    Shooter:
    Medium Format
    I have a Beseler 23C (the older gray style) condenser enlarger that I have been using for some time. I recently acquired a Dual Dichro head and power supply that I'd like to install, but am not sure how it physically attaches and/or replaces the existing head. Perhaps the unit is missing a piece. I have ordered a manual, but it will take several days to arrive. Can anyone point me in the right direction?
     
  2. nworth

    nworth Subscriber

    Messages:
    2,192
    Joined:
    Aug 27, 2005
    Location:
    Los Alamos,
    Shooter:
    Multi Format
    The Dual Dichro head can be used either with the condenser or as a diffusion light source. Installation as a diffusion source is easy: remove the condenser assembly, scrunch up bellows to minimum, and mount the the condenser head with the diffusion light mixer. To use the head with the condenser is more complicated and requires that you install a special light mixer that come in the original package. The best route for you to take is to contact Beseler and see if you can get a copy of the manual.