I am seriously eyeballing realestate in my basement to get set up with a simple printmaking area and already own a Bogen Super Pro enlarger with a 35mm carrier. I'm admittedly wet behind the ears with enlarging since I've only ever used what was provided to me (an ancient Omega from the 40s and newer Omega from the 90s..) I'm curious if this enlarger I have will get the job done effectively, or if I should look for something more common.. I'm new enough to this that I don't know the difference between this enlarger and a condenser head enlarger (or if this is one) Here's a photo of this Bogen: Currently it has a 50mm Schneider lens of some sort in there. The goal is mainly 35mm prints with the ability to do 6x6 and 6x9 medium format prints. However, the 6x6 carrier I ordered for it on ebay is the wrong size (way too small..) I'm just looking for thoughts before I really spend any money trying to get set up with this enlarger. If it's best to go with something newer, I'm open to suggestions. Also, if anyone knows where I can get carriers that fit it, that'd be great. Ebay has been a waste of my time/money up to this point. Apparently this enlarger is bigger than most of the common Bogen ones, but looks similar. I do like the setup for the vertical travel. It works smoothly.