Bronica Caps/Covers

Discussion in 'Medium Format Cameras and Accessories' started by lomomagix, Oct 19, 2008.

  1. lomomagix

    lomomagix Member

    Messages:
    43
    Joined:
    Sep 17, 2008
    Shooter:
    Medium Format
    Okay, so I've finally got caps for the body front, top, rear and bottom of my ETRS. I've also got a cover for the finders and a rear lens cap. Do the removable backs have available covers to protect them? Same question goes for the SQ-A and GS-1. Thanks!
     
  2. glbeas

    glbeas Member

    Messages:
    3,307
    Joined:
    Sep 25, 2002
    Location:
    Roswell, Ga.
    Shooter:
    Multi Format
    I've never seen any. The darkslides do an acceptable job of protecting the business end of the holder.
     
  3. DWThomas

    DWThomas Subscriber

    Messages:
    2,914
    Joined:
    Jun 13, 2006
    Location:
    SE Pennsylvania
    Shooter:
    Multi Format
    Never seen a cover for the backs, but I think Bronica used to offer some sort of belt pouch (or maybe it was just to carry a loaded insert). You can probably find a pouch for a digi-P&S that would fit a back (and be a fitting use!)

    DaveT
     
  4. lomomagix

    lomomagix Member

    Messages:
    43
    Joined:
    Sep 17, 2008
    Shooter:
    Medium Format
    Okay, so that explains why I never see anything like that come up on Ebay where I got all the other caps. Maybe they weren't made at all. Yes, the leather pouch-like thing only holds the insert (it doesn't close if the entire back is placed inside).

    Thank you both very much!