Cable to connect Stop Clock and a Zone Analyzer meter

Discussion in 'Enlarging' started by JeffD, Apr 28, 2005.

  1. JeffD

    JeffD Member

    Messages:
    308
    Joined:
    Aug 29, 2004
    Location:
    Atlanta, GA
    Shooter:
    4x5 Format
    I recently received a Zone Analyzer meter to go with my Stop Clock timer, by RHDesigns.

    I now realize I need a connecting cable between the two devices. I am thinking I should be able to make one, rather than order from over seas.

    Can anyone tell me if it is just a simple pair wire with 1/8 inch plugs on the end? Looks that way.... Looks like a trip to Radio Shack is in order.
     
  2. GeorgesGiralt

    GeorgesGiralt Member

    Messages:
    527
    Joined:
    Sep 16, 2004
    Location:
    Toulouse, Fr
    Shooter:
    Large Format
    Hi !
    Have you contacted Richard Ross of RH Designs ?
    He will give you first hand advice ;-)
    And may be able to send a drawing for proper cabling....
    Just my 2 ยข
     
  3. craigmj

    craigmj Member

    Messages:
    2
    Joined:
    Aug 24, 2004
    Shooter:
    35mm
    Linking StopClock and Zone Analyser

    Hi,

    Dr Ross informs me, when I was linking the two:

    It is a standard 3.5mm stereo jack-jack lead

    You can just make it up yourself, or RH Designs is very helpful.

    Have fun,
    Craig