Darkroom Sink

Discussion in '[Classifieds] For Sale' started by brass majestic, Sep 6, 2010.

  1. brass majestic

    brass majestic Member

    Messages:
    42
    Joined:
    Feb 6, 2007
    Location:
    Detroit, MI
    Shooter:
    35mm
    A 9 ft x 3 ft x 9 in. wood sink. The sides are 3/4 in. plywood. The bottom is 2 sheets of 3/4 in. plywood. Screwed and glued and caulked together and coated inside with marine epoxy paint - gray. Could use a re-coat. Drain hole is at back right corner. Standard size. Wood slats for trays included. Also water filter canisters. Very heavy & sturdy. No leaks. Also a heavy 9 ft. sink stand made with 2x4 posts and shelved (bottom) with 1/2 in. plywood painted dark green. Drying rack slots on right side. Presently in a storage unit in Livonia, MI. for the past year. Local pick-up only. Asking $300 OBO
     

    Attached Files:

    Last edited by a moderator: Sep 6, 2010
  2. George Collier

    George Collier Member

    Messages:
    1,064
    Joined:
    Feb 23, 2005
    Location:
    Richmond, VA
    Shooter:
    Multi Format
    Too far for me, but I like the cushion idea for the forearms on the front lip. Pipe insulation?
     
  3. brass majestic

    brass majestic Member

    Messages:
    42
    Joined:
    Feb 6, 2007
    Location:
    Detroit, MI
    Shooter:
    35mm
    You're right George. In fact, I think I may have picked up this tip on this forum somewhere.