Hi folks, it's my first time here - so be gentle with me! I've recently returned with gusto to 35mm photography having bagged myself a fabulous Contax G1. Having studied B&W photography as part of my design course at college (about 15 years ago) I had no problems developing my own black and white negs. However I just can't get to grips with C41 colour. My results are consistent but consistently poor. The negs seem a little dense and lacking in colour - especially blues. The results through my neg scanner (don't have room for a darkroom at the mo') are very pale. As I said the results are consistent - this is my 3rd roll developed (but I've used two different filmstocks so far). Each time I have strived for more temperature and timing accuracy than the last but with little improvement. I'm currently using: Fotospeed C41 Press Kit Dev and Blix In a standard Paterson tub And have used two different thermometers (went digital for more accuracy) and monitored the temp at all stages Timed on my swiss railway watch. Am I doing something fundamentally wrong? All help and advice gratefully received! Bob.