Display Prints in a gallery

Discussion in 'Presentation & Marketing' started by Nigel Harley, Nov 9, 2005.

  1. Nigel Harley

    Nigel Harley Member

    Messages:
    41
    Joined:
    Jul 19, 2004
    Location:
    Havant, Hamp
    Shooter:
    Multi Format
    I have a small gallery in a craft centre which I sell a few of my photographs. However, the biggest problem I have is a succesfull way of displaying unframed prints. These are mounted and sealed and wrapped in clear plastic.

    Any suggestions?

    Nigel
     
  2. juan

    juan Subscriber

    Messages:
    1,746
    Joined:
    May 7, 2003
    Location:
    St. Simons I
    Shooter:
    Multi Format
    Most people I see selling prints mounted this way have waist high bins filled with the prints. Something like the way record albums used to be sold. Customers just shuffle through the prints.
    juan
     
  3. Monophoto

    Monophoto Member

    Messages:
    1,691
    Joined:
    Aug 27, 2004
    Location:
    Saratoga Spr
    Shooter:
    Multi Format
    Are all of your prints unframed, or do you have a mixture of framed and unframed prints that you want to display?

    If I were in your situation, I would think about displaying mounted/mounted but unframed prints on the walls without plastic wrappers. Plastic sleeves do a wonderful job of protecting prints that are exposed to handling, but they do modify the appearance and impact of the print. Sleeves are probably best reserved for those prints that are displayed in bins.

    What kind of walls do you have in your gallery? Do you have the ability to install something on the wall to which you could attach prints? There are two possibilities to consider. One is to install a rail of some sort to hold prints. I've seen plans for wall installations that involve a pair of rails, each with a rabbet, to hold the prints in place. Of course, that would require that the mounts all be the same size and orientation.

    Another thought - here in the US we can buy a material called "homosote". This is basically a thick cardboard, typically 1/2" or 3/4" thick, and in 4x8' sheets. The attractive feature of this is that ordinary push pins can be used to attach mounted prints. The material comes in a fairly neutral gray color (probably closer to a 10% than an ideal 18% gray), and can be repainted if it becomes soiled. I have a sheet on the wall in my darkroom that I use to pin up work prints to stare at for a while before making final prints.
     
  4. Nigel Harley

    Nigel Harley Member

    Messages:
    41
    Joined:
    Jul 19, 2004
    Location:
    Havant, Hamp
    Shooter:
    Multi Format
    Thanks...

    My Gallery is about 12" sq. I have used garden square trellis painted white mounted on the walls. Makes frame hanging easy as framed prints can be moved and aligned very easily.

    Its the displaying of unmounted prints that is the problem. Waist high 'vinyl bins' is probably the best way. I've tried old wooden vegtable boxes painted white but they need alot of prints in them to stop prints from getting dmaged.

    thanks again for your inputs.