Does anyone know what size flexiclamp for the removal of the film advance leverSRT101

Discussion in '35mm Cameras and Accessories' started by Vsanzbajo, Jun 25, 2011.

  1. Vsanzbajo

    Vsanzbajo Member

    Messages:
    97
    Joined:
    Apr 27, 2011
    Location:
    Berkeley, CA
    Shooter:
    35mm
    Does anyone know what size flexiclamp to use for the removal of the film advance lever on a Minolta SRT 101?
    Or how can I do it. I tried with my fingers, impossible. May be anyone that lives around Berkeley, CA can help me out?
    Thanks in advance
     
    Last edited by a moderator: Jun 25, 2011
  2. John Koehrer

    John Koehrer Subscriber

    Messages:
    6,377
    Joined:
    Apr 3, 2004
    Location:
    Montgomery,
    Shooter:
    Multi Format
    Use a rubber stopper about the same diameter as the screw. Push down on the stopper as you rotate it and the screw should come right out.
    If that doesn't work super glue a flat piece of metal to the screw(I use tweezers) let it set and unscrew. The residue will clean off with acetone.
    JUST ONE DROP!