Durst CLS 450 Laborator 1000--stuff

Discussion in 'Enlarging' started by rcovingt, May 27, 2008.

  1. rcovingt

    rcovingt Member

    Messages:
    139
    Joined:
    Apr 25, 2008
    Location:
    Treasure Coa
    Shooter:
    Medium Format
    Ok here it goes==

    Durst ClS 450 with a Laborator 1000 not a scratch on it given to me--came with a Setopla 2839 recessed lens board, a 50mm lens, a taunoneg carrier, a taunomask 35mm and last but not least a taunobox 35mm...

    ....so here I am with a tank of an enlarger that I know is in great mechanical and cosmetic condition, but not to sure of the electrical.

    Electrical? you ask...yes that was the first hurdle no power supply...crazy Italian connectors and 24v converter box...wow!!--well 6 weeks go by of searching evilbay, google, searching old posts...and finally a breakthrough a power supply that did not sell on ebay(old post, completed listings search)Great 1 email 50$ and 10 days later I have a power supply...lucky me the seller had and sent two, so now there is a spare.

    In my quest I found that there were different light mixing boxes needed for different formats...more news to me as the 45mxt in school I used just required a lens and carrier change. Off we go again...

    .....found a taunobox 35, 66, and 69 in Germany, a Taunobox 69 in Canada, and I am currently trying to finish a deal with an Italian for the 450n--most expensive of course.

    Up to this point I am 9 months into this deal and I have decided its all or nothing..yes I know there are make not buy alternatives, but I want to find all Durst originals---A nastalgia thing..

    So Other than Glenview---great guy and all but I haven't won the lottery yet ---and stonemills who has no durst inventory except some very expensive photocopies---does anyone know where I can get a lead on these remaining items.

    Taunoneg
    Otopfe carriers all formats
    Taunomasks all formats except 35mm
    EPOI ST 450 Stabilizer Timer
    Replacement glass for the tauneg and the upper element for the light mixing box<---part names I haven't been able to determine yet)
    and (2) Lapla 39 lensboards

    I know someone out there has got a few of theses items hiding in a darkroom drawer....so can we help a guy out?

    best regards

    Robert

    Moral of the story goes--no such thing as a free puppy...........................................cheer
     
    Last edited by a moderator: May 27, 2008
  2. skahde

    skahde Member

    Messages:
    427
    Joined:
    Feb 16, 2004
    Location:
    Germany
    Shooter:
    Multi Format
    Robert,

    > Taunoneg

    better search for TAUNEG which should give more hits.

    > Otopfe carriers all formats

    The OTOPFEs are masks for the carriers OTONEG (for use with condensors) or TAUNEG (for use with diffuse lightsources).

    > Taunomasks all formats except 35mm

    Those masks are the OTOPFEs. "Taunomask" is new to me...

    > EPOI ST 450 Stabilizer Timer

    That is the EST450 aka COLISTA 450. It is not a timer, just a power-supply.

    > Replacement glass for the tauneg

    OTOGLAS, I use glass from focal point

    > and the upper element for the light mixing box

    Not available as a single part and not needed for and build into every mixing box. If a box doesn't have it, doesn't mean it is missing.

    <---part names I haven't been able to determine yet)

    Send me a PN and I can send you an accessory list. It is in german but the connection between pictures and part names should be universally comprehensible.

    It took me some time to complete a setup but with a bit of patience everything will show up eventually. As I said on photo.net, hardest thing was to find a Taunobox 450N which fits my budget.

    best

    Stefan
     
  3. brian.moorhead

    brian.moorhead Member

    Messages:
    4
    Joined:
    Feb 25, 2009
    Shooter:
    Med. Format RF
    Taunonegs

    Robert
    There appears to a complete set of Taunoneg masks on EBay UK as at today they have 6 days to go
    Regards
    Brian





     
  4. johnnywalker

    johnnywalker Subscriber

    Messages:
    2,260
    Joined:
    Sep 23, 2002
    Location:
    British Colu
    Shooter:
    Multi Format
    You can try Mr. Jensen at Durst-Pro Optical in Oregon. Some seem to find him a little difficult to deal with, but he was very helpful to me in finding a part for my Durst L1000.
    The phone number is 1 800 675 1493, and I believe he has a website as well - if so, I'm sure google will find it.