Enlarger help....

Discussion in 'Darkroom Equipment' started by johnny9fingers, Apr 28, 2006.

  1. johnny9fingers

    johnny9fingers Member

    Messages:
    108
    Joined:
    Sep 19, 2003
    Location:
    NW Wisconsin
    Shooter:
    35mm
    The other day I submitted a question regarding the Opemus 6X6 enlarger I purchased. Today I am attaching photos to see if this helps anyone provide insight or info. Will this negative carrier fit my enlarger? I am ordering a manual and hope this helps too... Thanks again and have a great weekend.
    9fingers
     

    Attached Files:

  2. metod

    metod Member

    Messages:
    102
    Joined:
    Mar 15, 2006
    Location:
    Montreal
    Shooter:
    Multi Format
    Hi Johnny,

    I have Opemus 5 enlarger and exactly the same looking negative carrier that I see on your picture. My enlarger does not look the same though. You can try this. I just measured the opening for the carrier on my enlarger, if yours is the same, I think it should fit. What do you think?

    Here are my dimensions: the height of the opening is 0.75 inch (2cm)
    The width and depth is the same (itÂ’s square) 5.25 inch (13.2cm)

    I hope it helps.

    Metod
     
  3. johnny9fingers

    johnny9fingers Member

    Messages:
    108
    Joined:
    Sep 19, 2003
    Location:
    NW Wisconsin
    Shooter:
    35mm
    Thanks Metod, I will check the dimensions you provided when I get home from work.
    9fingers