Exhibition Frames - Brushed Stainless Steel (Nielsen Type 117) 20x24

Discussion in '[Classifieds] For Sale' started by Sparky, Oct 8, 2010.

  1. Sparky

    Sparky Member

    Messages:
    2,099
    Joined:
    Jun 19, 2005
    Location:
    Los Angeles
    Shooter:
    Multi Format
    I have about TWENTY Nielsen custom cut 20x24 stainless steel finish (actually I think they're aluminum) frames. For ease of packing and shipping I will send without glass (buying your own is actually cheaper than the shipping difference!). But if you really need it I can provide you with Tru-Vue Museum Glass (much pricier though).

    I'd LOVE to sell these as a lot for your exhibition needs - but partial buys are okay. I may give preference to those who need the most frames however.

    The frames themselves are quite deep (front to back) at almost 1.5". the front lip is strikingly narrow at 1/4". $30 each first come first served. Can be cut down further on your end if you need a custom size.
     
  2. Sparky

    Sparky Member

    Messages:
    2,099
    Joined:
    Jun 19, 2005
    Location:
    Los Angeles
    Shooter:
    Multi Format
  3. williamtheis

    williamtheis Member

    Messages:
    53
    Joined:
    May 22, 2007
    Location:
    the Mojave d
    Shooter:
    4x5 Format
    $30 for 4 frame sections with hardware but no glass, correct?
     
  4. Sparky

    Sparky Member

    Messages:
    2,099
    Joined:
    Jun 19, 2005
    Location:
    Los Angeles
    Shooter:
    Multi Format
    Hi Bill - yes, correct. According to my calculations this should be around half price. I've only ever assembled four of them - and that was just for photo la (a photography art fair) here in los angeles.
     
  5. Sparky

    Sparky Member

    Messages:
    2,099
    Joined:
    Jun 19, 2005
    Location:
    Los Angeles
    Shooter:
    Multi Format
  6. Paul Sorensen

    Paul Sorensen Member

    Messages:
    1,897
    Joined:
    Nov 15, 2004
    Location:
    Saint Paul, MN
    Shooter:
    Multi Format
    Just so you know, the prices on the Blick web site are per pair, not single length, so you would need one 20" pair and one 24" pair to make a frame, coming to $33.60.
     
  7. Sparky

    Sparky Member

    Messages:
    2,099
    Joined:
    Jun 19, 2005
    Location:
    Los Angeles
    Shooter:
    Multi Format
    Hi Paul - no those are EACH actually - not per pair. The lower end frames ARE per pair of sides... not this model... it's twice that much. It's not like the frames are second hand anyway... all new!
     
  8. r-brian

    r-brian Member

    Messages:
    617
    Joined:
    Feb 25, 2003
    Location:
    Albuquerque,
    Sparky

    Paul might be right. This is cut and pasted directly from the linked site:

    "Nielsen Frame Sections are ordered in pairs of equal length. Each item you order is a pair, and two pairs complete a frame."

    I've ordered quite a few frames from different places and they always came as pairs.
     
  9. Roger Thoms

    Roger Thoms Subscriber

    Messages:
    905
    Joined:
    Nov 18, 2007
    Location:
    San Francisc
    Shooter:
    4x5 Format
    Hey Sparky, checked the link that you gave and it states quite clearly that the section are priced as pairs, hardware included.

    Roger
     
  10. Sparky

    Sparky Member

    Messages:
    2,099
    Joined:
    Jun 19, 2005
    Location:
    Los Angeles
    Shooter:
    Multi Format
    hmmmm.. weird... i looked all over that page and could find nothing to that effect... well - if that's the case then I guess it's better to hang onto them...