FS: Jobo CPP2 with lift and option on ATL1 head

Discussion in '[Classifieds] For Sale' started by KennyMark, Aug 15, 2013.

  1. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    Option 1: Jobo CPP2 with CPA2/CPP2 lift $500 + shipping

    Option 2: Jobo CPP2 with ATL1 head $1000 + shipping

    Option 3: Jobo CPP2 with ATL1 head and CPA2/CPP2 lift $1200

    I will pay the PayPal fees and packaging, you will pay actual shipping.photos to come soon.

    Yes, this is difficult for me but opportunities demand sacrifices.
     
  2. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    So the site won't let me choose photos on my iPad to upload. Must wait until I'm at a computer I guess.
     
  3. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    CPP2:ATL1-01.jpg CPP2:ATL1-02.jpg CPP2:ATL1-03.jpg CPP2:ATL1-04.jpg CPP2:ATL1-05.jpg
     
  4. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    CPP2:ATL1-06.jpg CPP2:ATL1-07.jpg CPP2:ATL1-08.jpg CPP2:ATL1-09.jpg CPP2:ATL1-10.jpg
     
    Last edited by a moderator: Aug 15, 2013
  5. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    CPP2:ATL1-11.jpg CPP2:ATL1-12.jpg CPP2:ATL1-13.jpg CPP2:ATL1-14.jpg CPP2:ATL1-14.jpg CPP2:ATL1-15.jpg
     
    Last edited by a moderator: Aug 15, 2013
  6. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    Additional info:

    CPP2: There is a crack in the rear of the heater/pump case at the corner. Will not affect operation or functionality. There are a couple of screws and nuts missing, nothing that will affect operation or functionality, but makes it easier to perform maintenance on the unit. You can read the serial number in one of the photos. The bottles, graduated cylinders, and red tray have chemical stains and scale from water, as is typical of units I've seen that have been used. I am not the original owner, I purchased from a photographer that used this to process film in his studio.

    ATL1: This head has not been put into service by me yet. I was told by the previous owner that there is some damage to the plastic housing that will not affect the operation or functionality. I did find one crack in the plastic housing of the arm that guides the recovery hoses on the left end of the unit. The previous owner told me that prior to selling, he tested it for temp, program cycles, and air pressure, which all worked properly. He did not test all 8 programs prior to selling to me. While I forgot to install the lift arm rails for the photograph, they will be included and are intact. There are two broken tank clips on the lift that I will replace with new repair clips prior to shipping this unit to you.

    Neither unit is beautiful cosmetically. This is a user machine.
    Please ask questions.
     
  7. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    Price reduced

    Dropping by $100

    1: $400
    2: $900
    3: $1100
     
  8. Ghostman

    Ghostman Member

    Messages:
    504
    Joined:
    Dec 5, 2011
    Location:
    Switzerland
    Shooter:
    Multi Format
    And you're shipping from Holland?
     
  9. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    Holland, Michigan, USA. Yes, and I will ship to some other countries, including Switzerland.

    Note that these are 120 volt models.
     
  10. Ghostman

    Ghostman Member

    Messages:
    504
    Joined:
    Dec 5, 2011
    Location:
    Switzerland
    Shooter:
    Multi Format
    Ha! I didn't see the MI :smile:

    This is looking like a very nice deal. I'll flirt with the idea.
     
  11. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    I'm going to be out of town for the weekend. Me, the motorcycle, an RZ67, and a roll of 220 Plus-X. Going to cross the bridge into the U.P., eh?
     
  12. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    I'm back.

    El bumpo
     
  13. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    I had planned to keep my chemical recovery stand and bottles to use with my next processor, but in the hopes that it attracts the right buyer, I've decided to give another option to whomever buys this processor.

    1) $400 plus shipping
    2) $900 plus shipping (2 cartons)
    3) $1100 plus shipping (2 or 3 cartons)
    4) CPP2 plus ATL-1 plus chemical recovery stand with 6 bottles: $1100 plus shipping (2 or 3 cartons)
    5) CPP2 plus CPA2/CPP2 lift plus ATL-1, plus chemical recovery stand with 6 bottles: $1300 plus shipping (3 or 4 cartons)

    This won't be terribly heavy, but it will be large.
     
  14. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    CPP2 and lift sold

    ATL1 head, chemical recovery stand, 6 bottles $700 plus shipping
     
  15. KennyMark

    KennyMark Member

    Messages:
    212
    Joined:
    Jun 6, 2013
    Location:
    Holland, MI
    Shooter:
    Multi Format
    bump