Fs: Packard Shutter 2.5" Opening, 4.75" overall size

Discussion in '[Classifieds] For Sale' started by Jon Shiu, Jul 30, 2014.

Thread Status:
Not open for further replies.
  1. Jon Shiu

    Jon Shiu Subscriber

    Messages:
    2,823
    Joined:
    Dec 2, 2003
    Location:
    Elk, Califor
    Shooter:
    Plastic Cameras
    In nice condition. Good for using all those barrel lenses lacking shutters.

    I cleaned it inside and it is working fine in both instant and time mode.

    $50 incl. US postage. International shipping also available. Paypal accepted.

    Jon
    1pack2.jpg
    1pack.jpg
     
  2. j-dogg

    j-dogg Subscriber

    Messages:
    1,322
    Joined:
    Jun 26, 2010
    Location:
    Floor-it-duh
    Shooter:
    Multi Format
    How do you mount lenses to it?

    Ive got a few barrel lenses for 5x7 i'd love to use
     
  3. Jon Shiu

    Jon Shiu Subscriber

    Messages:
    2,823
    Joined:
    Dec 2, 2003
    Location:
    Elk, Califor
    Shooter:
    Plastic Cameras
    The Packard is usually screwed to the back of the lens board, and a hole drilled in the lens board to allow a air tube to go through. The barrel lens is then mounted to the front of the lens board, sometimes with a raised box to allow for the rear element to clear the shutter.

    Another method used is to mount the Packard to the front of the lens.

    Jon
     
  4. Jon Shiu

    Jon Shiu Subscriber

    Messages:
    2,823
    Joined:
    Dec 2, 2003
    Location:
    Elk, Califor
    Shooter:
    Plastic Cameras
    still available
     
Thread Status:
Not open for further replies.