Fuji 100c to tight to pull??

Discussion in 'Instant Cameras, Backs and Film' started by FM2N, Apr 22, 2008.

  1. FM2N

    FM2N Member

    Messages:
    844
    Joined:
    Jun 23, 2006
    Shooter:
    35mm
    Hello All,
    trying to use Fuji 100c in my Polaroid 360 and it will not pull out after the picture is taken. Any ideas to fix this problem? Rollers are clean, battery is new.
    Thanks for the help.
    Arthur
     
  2. amuderick

    amuderick Member

    Messages:
    283
    Joined:
    Jan 13, 2007
    Shooter:
    Large Format
    On the inside door of your Polaroid 360 you'll find a metal spring that, when the door is closed, pushes the film pack forward against the film plane. Using your fingers, press hard against this spring and bent it back slightly. It should now apply less pressure to the Fuji film pack (which is slightly thicker than Polaroid packs). That should solve your problem.