Fuji Crystal Type II Glossy default filtration

Discussion in 'Color: Film, Paper, and Chemistry' started by lhalcong, Jan 25, 2013.

  1. lhalcong

    lhalcong Member

    Messages:
    239
    Joined:
    Nov 26, 2012
    Location:
    Miami, Flori
    Shooter:
    35mm
    What is the default initial filter pack for Fuji Crystal Archive Type II Glossy finish. Kodak Endura has the initial filtration pack noted on the box. I could not find one on the Fuji Crystal box ?

    thanks
     
    Last edited by a moderator: Jan 25, 2013
  2. Greg Davis

    Greg Davis Member

    Messages:
    2,057
    Joined:
    Feb 4, 2004
    Location:
    Nicholasvill
    Shooter:
    8x10 Format
    I use the same as Kodak paper.
     
  3. pinholer

    pinholer Member

    Messages:
    86
    Joined:
    Dec 23, 2010
    Shooter:
    Multi Format
    The starting filter pack shown on my last box of supra endura was 65M 55Y. My filter pack on the B22 with 160 NC film was 90M 120Y. When I started printing on CA2 my filter pack became, after some test prints, 85M 105Y. I did have to adjust my exposure down by about a quarter stop.

    Greg Davis advice above is good. Start with what you used with Kodak paper but realize that you will have to adjust a little.