Hi, I've been developing my own colour for the last couple of weeks using Fuji Hunt chemicals (I've made a video of me doing it if anybody is interested - see here) and so far all has been well. Until last night when I did a new batch but instead of developing Fuji Velvia and Provia, I included some Astia. The results from the Astia have been less than pleasing.. I processed two sheets of the same shot, one velvia, one astia and the astia has a pronounced green cast. It's the three stage process I'm using with 6'30, 6', 6' (Jobo drum with 4 sheets of 5x4 with 2' wash in between and a 4' wash at the end) at 38 degrees. I use the chemicals for a second and third batches with 30" added on to each stage for the second batch and 60" for the third batch.. These were done in the third batch but, like I say, the velvia and provia have been consistent across the different batches and both the velvia and provia versions of the same shot were in the same last batch. Any suggestions would be appreciated because I'm clueless My next stage was going to be running some astia on it's own through stage one (6'30, 6', 6'). Help!!?