Hasselblad Lens Repair

Discussion in 'Medium Format Cameras and Accessories' started by csad2001, Sep 15, 2012.

  1. csad2001

    csad2001 Member

    Messages:
    1
    Joined:
    Apr 12, 2010
    Shooter:
    35mm
    Hello,

    hope that this question was not asked 1000 times before.

    I got a Distagon 50 4.0 C for a few bucks, but there is some fog and dust inside the lens.
    As far as I can see - it is inside the rear lens part - the front lens part seems to be ok.

    As I have allready opened/cleaned other simpler lenses without build in shutter - I am not
    sure how to remove the rear lens element successfully. I have seen the two holes for
    the appropriate wrench to unmount the back lens - but it seems to me, that this needs a lot of force
    (which i would not apply at the moment). Is there something special I should consider ?

    As mentioned before - I just want to remove the back lense group - not open/dissmantle anything else of that lens.

    Many thanks in advance for any help !

    regards