How does dry time effect emulsions?

Discussion in 'Silver Gelatin Based Emulsion Making & Coating' started by studiocarter, Jan 22, 2010.

  1. studiocarter

    studiocarter Member

    Messages:
    250
    Joined:
    Dec 19, 2008
    Location:
    Pittsburgh
    Shooter:
    ULarge Format
    Last August 8 I made some notes from APUG and it was a good thing that I did because I can't find the source now.

    The article or post said that Dry time is a factor according to Mark S. Pederson, a writer in APUG (can't find him either). The notes say that 24 hours drying time (of Liquid Light I think) gives a ASO of 1/4, 48 - 72 hours drying gives ISO 1/2, 5 days or more ISO of 1, and 14 days will fog emulsion.

    Where is that post?

    The reason is that I made a 4x5 plate and exposed it and got a picture. Howeve, the exposure was way longer than others under similar conditions, namely bright sun. The difference was that the new long exposure was cooked dry in the oven for over one hour, not dried one or two days in a cool dark room.
     
  2. wildbillbugman

    wildbillbugman Member

    Messages:
    819
    Joined:
    Apr 18, 2005
    Location:
    San Bernardi
    Shooter:
    8x10 Format
    Personaly, I never make conclusions by comparing one print to one print. Or even one print to many. But if you heated a print befor it was dry, probably the viscosity plunged down and the coating spread out and formed a thiner layer of emulsion. Then you are comparing different thicknesses, There very well could be a reduction in ISO for "older" dried plates. But you would have to treat them identicly, except for aging, to make that conclusion.
    Bill