How to safely remove a cog from a Jobo lid

Discussion in 'Darkroom Equipment' started by CatLABS, Jul 26, 2013.

  1. CatLABS

    CatLABS Subscriber

    Messages:
    1,473
    Joined:
    May 20, 2011
    Location:
    MA, USA
    Shooter:
    Large Format
    Following the many questions we get about this topic, we decided to upload a video that shows how to remove the cog from your Jobo lid.
    The cog (#1505) was designed to be a permanent addition to the lid, but as seen in this video, can easily be removed, and replaced (if damaged), or for converting the lid for use as in inversion lid (red membrane cap #03046 will be needed).


    Check it out on youtube here:
    http://youtu.be/JGWEGjoWNmQ