Infrared film and Canon EOS 7NE

Discussion in '35mm Cameras and Accessories' started by olwick, Feb 25, 2011.

  1. olwick

    olwick Member

    Messages:
    216
    Joined:
    Dec 18, 2007
    Location:
    Seattle WA
    Shooter:
    Multi Format
    Hi,

    I know there's a warning about using high speed infrared film in the Canon EOS Elan 7NE (I think I read it's the film counter or something).

    I was wondering though if anyone has tried Efke IR820 in one to see what actually happens. It's not exactly high speed as I've shot it in other cameras at ISO 6 or 25 (820 refers to the nanometer wavelenght that it's sensitive to, not the film speed)

    Also is there a way to disable that little IR lamp that's causing the trouble? What would happen?

    Thanks,

    Mark
     
  2. dnjl

    dnjl Member

    Messages:
    376
    Joined:
    Sep 19, 2010
    Location:
    Switzerland
    Shooter:
    35mm
  3. olwick

    olwick Member

    Messages:
    216
    Joined:
    Dec 18, 2007
    Location:
    Seattle WA
    Shooter:
    Multi Format
    That's a fantastic link. Thank you Walter. He stresses that it's only about Kodak HIE which was sensitive at 900nm, vs 820 for the Efke. I think I'll just need to do some experimentation to see how/if the Efke is affected. The article was encouraging though in talking about how bad it is even when the fogging happens (sometimes just along the sprockets).
     
  4. moki

    moki Member

    Messages:
    161
    Joined:
    May 10, 2010
    Location:
    Wismar, Germ
    Shooter:
    35mm
    My EOS 50e (Elan IIe) never fogged any Rollei IR-400 (that goes to about 820, if I remember correctly). Only very slight darkening right around the sprocket holes, but that could have been a developement error as well.

    And no, there is no way to disable the little IR-lamp, as it's the cameras way to count the sprocket holes until the next frame. If you'd put a piece of tape over it, the camera would either respond with some obscure error code or by spooling the whole film at once without ever stopping.
     
  5. Josh Harmon

    Josh Harmon Member

    Messages:
    79
    Joined:
    Jun 30, 2010
    Location:
    Silicon Valley
    Shooter:
    Multi Format
    I had this same dilema when I first started shooting IR film. I just opted to using my oldest EOS camera, a 630, because it has a mechanical counter.