Inglis or Radeka?

Discussion in 'Enlarging' started by Mike Lyons, Sep 21, 2004.

  1. Mike Lyons

    Mike Lyons Member

    Messages:
    30
    Joined:
    Apr 20, 2004
    Location:
    Western Aust
    Hi to all. Can anyone give me opinions of the pros and cons of the masking kits (negative carriers and pin registration kits) from both Alistair Inglis and Lyn Radeka? Both seem pretty comprehensive, particularly the info kit from Radeka, but has anyone who has used them have any comments? Thanks in advance.
    Regards- Mike
     
  2. Donald Miller

    Donald Miller Member

    Messages:
    6,242
    Joined:
    Dec 21, 2002
    Shooter:
    Large Format
    I purchased Radekas previous incarnation of his masking system. I realize that he has upgraded things a bit since then. His guidance in technique was good in the system that I bought. His hardware sucked pretty badly and thus I ended up doing my own design and modifications to allow pin registration for masking.

    I have heard very good things about the other system that you mention. I have no experience with it personally. I imagine that you will find that Radeka's system will be less expensive but I would really check into things like what the guaranteed departure from true registration would be in repeated removals and insertions of film into the negative holder and negative holder into the negative stage of the enlarger.

    I would want a guaranteed departure of no more the three one thousands of an inch. That means a total of no more then three one thousands of an inch throughout the entire spectrum of film into negative holder and negative holder into negative stage of the enlarger. That is a very tight tolerance and is required for good results in sharp masking techniques. Whomever would guarantee me that degree of precision would be who I would purchase from irregardless of cost.
     
  3. hortense

    hortense Member

    Messages:
    612
    Joined:
    Jun 17, 2004
    Location:
    Riverside, C
    Shooter:
    Large Format
    Alistair Inglis' masking system is, by far, the best. Radeka's device don't even compare (I've seen them and talked to him). However, is "how to" written material is great. I've used Inglis' system for a long time and can attest to its perfection.
     
  4. Mike Lyons

    Mike Lyons Member

    Messages:
    30
    Joined:
    Apr 20, 2004
    Location:
    Western Aust
    O.K, thanks for the advice- I'll take it on board.
    Regards- Mike
     
  5. GreyWolf

    GreyWolf Member

    Messages:
    166
    Joined:
    Feb 10, 2003
    Location:
    North of Cal
    Hi Mike,

    I also can confirm that Alistair Inglis's system is very well made. I did a review with pictures on Tuan's LF site should you wish to check it out.

    Kind Regards,
     
  6. Paddy

    Paddy Member

    Messages:
    338
    Joined:
    Jan 16, 2004
    Location:
    Vancouver, B
    Shooter:
    Multi Format
    Mike; while I've not yet purchased his unsharp mask kit, I can attest to the quality of his production methods. I've met Alistair a number of times, and had extensive discussions about his products. He's passionate and knowledgable about what he does. His product quality is very high, as are his machining skills/tolerances. BTW, he also makes a great dye/dodge mask kit too.

    He's also supplied his masking kit to a number of very well known shooters in the States.