I recently bought a atl 1000.and it now comes a problem with the water bath. for the BW programs, it doesnt have the water bath. on the instruction it says "B&W Film and All Print Processes: These are processed at 24.0°C (75°F). Your processor will start these processes when it has heated the chemicals to 24.0°C. It is important to note that these programs will run at any temperature above 24.0°C." but even the chemicals below 24.0°C or i have even tried below 19°C, it still doesnt comes up the water bath, it go straight to processing.but on the c41 and e6 programs. it works fine. i dont know whats wrong with it. i have uploaded a video on youtube . please search "For catlabs.jobo.outlet 2" on youtube.