Jobo ATL-3000 plumbing question

Discussion in 'Darkroom Equipment' started by Christopher Nisperos, Jan 31, 2013.

  1. Christopher Nisperos

    Christopher Nisperos Member

    Messages:
    423
    Joined:
    Oct 1, 2004
    Location:
    Paris, France
    Shooter:
    Multi Format
    I've already read the installation instructions for the Jobo ATL-3000, but I just can't figure out the following: If the Jobo ATL-3000 (floor model, not the table top version), requires:

    • one, single cold water output (one faucet) only
    • individual hot AND cold water faucets (total, two faucets)
    • an individual cold water faucet and a mixing "Hot/Cold" faucet (total, two faucets

    Can any of you please help me on this? I need the information rather quickly, so you're welcome to email me directly or pm me.

    Kind thanks,

    Christopher
     
  2. CatLABS

    CatLABS Subscriber

    Messages:
    1,473
    Joined:
    May 20, 2011
    Location:
    MA, USA
    Shooter:
    Large Format
    as far as i remember you will need one cold water inlet, and one hot water inlet. the hot water inlet, can be a mixed hot\cold with a mixing valve.