JOBO CPA 2 No Instructions

Discussion in 'B&W: Film, Paper, Chemistry' started by BarrieB, Apr 9, 2005.

  1. BarrieB

    BarrieB Member

    Messages:
    110
    Joined:
    Apr 19, 2003
    Location:
    Melbourne, A
    Shooter:
    Multi Format
    Greetings; I am new to rotary processing , It appears that the Jobo CPA 2 can be used for both Prints and Films; I do not have an
    Instruction book , where could I locate the information I may need to operate this machine? I intend to try Sheet Film ( 4 x 5 ) first. I assume F on the motor button will give me the correct speed of rotation,
    Cheers Barrie B. Australia.
     
  2. lee

    lee Member

    Messages:
    2,913
    Joined:
    Nov 23, 2002
    Location:
    Fort Worth T
    Shooter:
    8x10 Format
  3. lee

    lee Member

    Messages:
    2,913
    Joined:
    Nov 23, 2002
    Location:
    Fort Worth T
    Shooter:
    8x10 Format
    barrie,

    look under "support" in the analog section and choose the manual option

    lee\c
     
  4. hka

    hka Member

    Messages:
    2,147
    Joined:
    Dec 21, 2004
    Shooter:
    Multi Format
    Manualllll....

    Here it is.
    Don't expect to much from it.
     
    Last edited by a moderator: Jul 7, 2008
  5. Bob F.

    Bob F. Member

    Messages:
    3,984
    Joined:
    Oct 4, 2004
    Location:
    London
    Shooter:
    Multi Format
    There is a much larger manual on the site Lee referenced - nearly 100 pages worth.

    Bob.
     
  6. chuck94022

    chuck94022 Subscriber

    Messages:
    684
    Joined:
    Jan 11, 2005
    Location:
    Los Altos, C
    Shooter:
    Multi Format
    Yes, the site has plenty of information. And the first thing you will learn is that "F" is not the speed you want... :smile:

    -chuck
     
  7. BarrieB

    BarrieB Member

    Messages:
    110
    Joined:
    Apr 19, 2003
    Location:
    Melbourne, A
    Shooter:
    Multi Format
    Missing Instructions, Jobo CPA 2 .

    ******* Thanks every-one, I now have ALL the much needed instructions, great. I have the unit set-up and expect to give it a ' trial run ' soon. Gee APUG is a great ' Community ', I hope I can be of help to someone one day. Cheers Barrie B. :wink:
     
  8. CHHAHH

    CHHAHH Member

    Messages:
    23
    Joined:
    Dec 26, 2013
    Location:
    Hamburg, Ger
    Shooter:
    Medium Format
    Hey good people!
    I would like to re-open this topic. :smile:

    I good a Jobo CPA with a lift for a bargain. But no instructions than the 1 sheet of paper included. Overall i think i know what to do with it but i still have no idea how much water i should put into it and what rotation speed and mode i should use.. I was hoping that somebody here could help me with that :smile:

    Thanks a lot!
     
  9. wildbill

    wildbill Member

    Messages:
    2,851
    Joined:
    Nov 28, 2004
    Location:
    Grand Rapids
    Shooter:
    Multi Format
    So, you don't want to read the instructions provided by lee in this thread?
    this is on the very first page-Tempering bath capacity: 4.75 gallons (18 liters)
    page 8 gives recommended rotation speeds
     
  10. CHHAHH

    CHHAHH Member

    Messages:
    23
    Joined:
    Dec 26, 2013
    Location:
    Hamburg, Ger
    Shooter:
    Medium Format
    I couldn't open the link... :sad:
    But thanks for your answer!!!
     
  11. ic-racer

    ic-racer Member

    Messages:
    7,483
    Joined:
    Feb 25, 2007
    Location:
    Midwest USA
    Shooter:
    Multi Format