Jobo cpe 2 lift

Discussion in 'Darkroom Equipment' started by Rhodes, May 29, 2012.

  1. Rhodes

    Rhodes Member

    Messages:
    494
    Joined:
    Sep 28, 2009
    Location:
    Figueira da
    Shooter:
    35mm
    Many times when pouring the chemicals to the lift, a few drops or more of them exit the discharge hose. Is it because I am pouring very fast?

    PS: Sorry for the title, I forgot to change to a better one.
     
  2. CatLABS

    CatLABS Subscriber

    Messages:
    1,473
    Joined:
    May 20, 2011
    Location:
    MA, USA
    Shooter:
    Large Format
    Most likely the answer is that the fluids do not drain fast enough into your drum, causing a water buildup in the funnel, which eventually over flows into the discharge hose.
    Pour in slower.
     
  3. Rskmd83

    Rskmd83 Member

    Messages:
    1
    Joined:
    Oct 30, 2011
    Shooter:
    Large Format
    Yes
     
  4. Rhodes

    Rhodes Member

    Messages:
    494
    Joined:
    Sep 28, 2009
    Location:
    Figueira da
    Shooter:
    35mm
    My thoughts exactly. Thanks!