Jobo CPE2 and 2800 print drum

Discussion in 'Darkroom Equipment' started by sandholm, Jan 25, 2010.

  1. sandholm

    sandholm Subscriber

    Messages:
    232
    Joined:
    Nov 17, 2009
    Location:
    Switzerland
    Shooter:
    Multi Format
    Hi,

    Very simple question, i just got an lift to a CPE2, and I wounder if i can use the cog lid with a 2800 print drum, and use the lift while processing prints.

    I checked the Jobo homepage, but didn't find anything about fitting a cog wheel to the 2800 series.

    cheers
     
  2. Soeren

    Soeren Member

    Messages:
    2,441
    Joined:
    Nov 5, 2004
    Location:
    Naestved, DK
    Shooter:
    Multi Format
    Im not sure I understand your question but yes cog lids can be used with the 28000series drums. I you have a 2500 series drum with a cog lid just use that lid. the 2500 and 2800 series are, except for the funnel/cup and centerpost, the same.
    Best regards
     
  3. sandholm

    sandholm Subscriber

    Messages:
    232
    Joined:
    Nov 17, 2009
    Location:
    Switzerland
    Shooter:
    Multi Format
    Hej Soeren

    That was my question, perfect, I tried the lib and it fitted but I wanted just to make sure
    (ilfochrome is to expensive to screw up... :wink:

    thanks