Jobo Lift Arm/Lever

Discussion in '[Classifieds] Want to Buy' started by John Snyder, Jul 20, 2010.

  1. John Snyder

    John Snyder Member

    Messages:
    36
    Joined:
    Dec 13, 2004
    Location:
    Moscow, Idah
    Shooter:
    Large Format
    I'm looking to buy the lever for a Jobo CPP/CPE lift. The one on mine broke after many years of use. If anyone has that part or a defunct lift with the lever in good shape, I be interested in getting ahold of it.

    Thanks,

    John
     
  2. sage

    sage Member

    Messages:
    134
    Joined:
    Sep 8, 2006
    Shooter:
    35mm
    Why dont you just not use the arm and just lift it by the metal support things under the tank that run the length of the top division?
     
  3. John Snyder

    John Snyder Member

    Messages:
    36
    Joined:
    Dec 13, 2004
    Location:
    Moscow, Idah
    Shooter:
    Large Format
    That's what I had to do when the arm broke--with difficulty. The drum (3005) for 8X10 is much longer than the metal support rails underneath and so they are really hard to reach. I don't see any way to get repeatable results that way....