Jobo with 1 water hookup?

Discussion in 'Darkroom Equipment' started by eddie, Dec 19, 2009.

  1. eddie

    eddie Subscriber

    Messages:
    1,979
    Joined:
    Jul 24, 2005
    Location:
    Northern Vir
    Shooter:
    Multi Format
    Temporarily, I'm down to one faucet in the darkroom. Is it possible to run my Jobo this way? It's only for B&W processing, and I can regulate the temperature.
     
  2. edtbjon

    edtbjon Member

    Messages:
    396
    Joined:
    Jun 8, 2004
    Shooter:
    Medium Format
    Which Jobo???
     
  3. eddie

    eddie Subscriber

    Messages:
    1,979
    Joined:
    Jul 24, 2005
    Location:
    Northern Vir
    Shooter:
    Multi Format
    I have an ATL2 and a CPP2. Whichever one would work best.
     
  4. Dave Dawson

    Dave Dawson Member

    Messages:
    178
    Joined:
    Feb 15, 2009
    Location:
    London UK
    Shooter:
    Medium Format
    The ATL-2 would work as long as you don't program a rinse....Just Dev, Stop and Fix steps...Then wash external.

    Cheers Dave
     
  5. Kirk Keyes

    Kirk Keyes Member

    Messages:
    3,268
    Joined:
    Jun 17, 2004
    Location:
    Portland, OR
    Shooter:
    4x5 Format
    Just fill the CPP with water and it will temper it for you. Adjust your water temp for rinses and that's all you need.
     
  6. edtbjon

    edtbjon Member

    Messages:
    396
    Joined:
    Jun 8, 2004
    Shooter:
    Medium Format
    Yes, with the CPP you have to adjust any rinse water temp yourself anyhow as the water inlet is only for cold water if you need to cool the whole process down. With the ATL you just have to set the temp ever so slightly below the intended process temp (e.g. 23.5C for 24C process temp).

    //Björn