Kodak LED safelight, anyone using?

Discussion in 'Darkroom Equipment' started by brbeck, Feb 26, 2012.

  1. brbeck

    brbeck Subscriber

    Messages:
    77
    Joined:
    Feb 21, 2010
    Location:
    San Antonio,
    Shooter:
    Medium Format
    Wondering if anyone is using a Kodak LED safelight? My current 5x7 light is too dark. I either need to buy another one or go a different route. I'd like to know how it compares to other safelights as far as brightness and coverage?
     
  2. jp498

    jp498 Member

    Messages:
    1,467
    Joined:
    Oct 5, 2009
    Location:
    Owls Head ME
    Shooter:
    Multi Format
    I didn't know kodak makes one, but red LEDs are nice!

    I've setup a tracklight on my darkroom ceiling and use red screw-in led fixture sorta of like the kodak led safelight, but a little smaller (par-20ish) and much cheaper (deal extreme) Mine only light about a 2-3' area from 5' above the sink. I have five red LED bulbs fixtures lighting the sink area and beside my enlarger. very very bright compared to a 9x12"-ish kodak OC ceiling fixture.
     
  3. barzune

    barzune Member

    Messages:
    131
    Joined:
    Mar 28, 2010
    Location:
    Ontario
    Shooter:
    Multi Format
  4. zumbido

    zumbido Member

    Messages:
    123
    Joined:
    Jan 5, 2010
    Shooter:
    Medium Format
  5. Neal

    Neal Subscriber

    Messages:
    1,617
    Joined:
    Dec 3, 2004
    Location:
    Chicago, Wes
    Shooter:
    Multi Format
    Dear Brian,

    The Kodak product is sure to work well. You can be certain there will be no issues with paper fogging. Having said that, while $40 isn't a lot to spend for a safelight, you might consider looking at this model from superbrightleds.com.

    E27-x36-G: E27 LED Bulb, 36 LED

    Medium Screw Base bulb with 36 LEDs
    120 VAC, 2.6 Watt, 95 Lumen, Indoor/Outdoor with diffuser globe and weatherproof rubber socket seal
    Measures 3.25" overall legnth x 2.36" diameter
    Available in Cool White, Warm White, Blue, Green, Red, Yellow or RGB Color Changing
    Price for each. $9.95

    Neal Wydra
     
  6. Roger Cole

    Roger Cole Member

    Messages:
    5,479
    Joined:
    Jan 20, 2011
    Location:
    Atlanta GA
    Shooter:
    Multi Format
  7. brbeck

    brbeck Subscriber

    Messages:
    77
    Joined:
    Feb 21, 2010
    Location:
    San Antonio,
    Shooter:
    Medium Format
    Roger, this is the one.

    I've know people are using other LEDs which would be fine. However, it seems everyone uses something different. I'm not too concerned about the price but was really wanting to know what people thought about the product. I need a light above my 8 foot counter where my trays will be. I really only want this area light as I like the area around my enlarger darker.

    Could someone tell me with there current LED light set up how from the light source does the light fall? I would like it to go at least 4 ft so it would light up my counter when mounted at the center. the light would be mounted 4-5 ft above the counter.

    Thanks
     
  8. MattKing

    MattKing Subscriber

    Messages:
    16,809
    Joined:
    Apr 24, 2005
    Location:
    Delta, BC, Canada
    Shooter:
    Multi Format
    I have 9' ceilings in my darkroom (aka bathroom), and the paint colour is a light tan.

    I have three red LED bulbs in my darkroom. Each is in an adjustable "gooseneck" reflector. Two of them are mounted at about 7' height, on the top of my enlarger column, with one of those being "switched" by the timer. The third is mounted near the ceiling above trays, which are on a shelf resting on the rim of the bathtub. The ceiling above the trays is about 6' above them.

    All three lights are pointed at the ceiling, so the distance from light to ceiling and then back to paper is somewhere around 6' - 8' in each case.

    The gooseneck reflectors are positioned to give light in the three areas of the darkroom (enlarger, paper trimmer and trays) where I need it.

    Hope this helps.

    PS: here is the current listing for the LED bulbs I bought about 2.5 years ago: http://www.dealextreme.com/p/18-led-e27-light-bulb-110v-red-5136

    I was happy with my dealings with the seller, with the possible exception of the fact that the packing was a bit "minimal".
     
    Last edited by a moderator: Feb 27, 2012
  9. Neal

    Neal Subscriber

    Messages:
    1,617
    Joined:
    Dec 3, 2004
    Location:
    Chicago, Wes
    Shooter:
    Multi Format
    Dear Brian,

    If money is no object, buy a Thomas Duplex. They are wonderful.

    Neal Wydra
     
  10. Henry Alive

    Henry Alive Subscriber

    Messages:
    197
    Joined:
    Aug 16, 2006
    Shooter:
    Multi Format
    I am looking for a red led like the one showed by Barzune, but this one is for 120 volts, and I need a 240 Volts led. Can somebody recommend a supplier?
    Thanks,
    Henry.
     
  11. michael_r

    michael_r Subscriber

    Messages:
    6,542
    Joined:
    Feb 2, 2010
    Location:
    Montreal, Canada
    Shooter:
    Multi Format
    Not sure but this might be of interest. It's a fun little project. I have since built a new "Mark II" version which contains both red and white LEDs, and accepts Kodak safelight filters. So I can either run it uncovered with the red LEDs on for excellent safe times with paper, or if I'm working with ortho films for masking, I can slide in a #1 or even #2 Kodak safelight filter and use the white LEDs.

    http://www.apug.org/forums/forum43/95317-my-new-diy-led-red-safelight.html