leaking nova quad

Discussion in 'Darkroom Equipment' started by rizla, Sep 17, 2006.

  1. rizla

    rizla Member

    Messages:
    5
    Joined:
    Aug 8, 2006
    Shooter:
    35mm
    I've just purchased a nova quad and when i fill the internal cavity with water noticed a leak around both green temp blocks at the front of the processor.

    On closer inspection they appear to be loose and held in place with clear silicon. Has anyone had any experiance of this and made a repair.

    regards
    rizla
     
  2. rizla

    rizla Member

    Messages:
    5
    Joined:
    Aug 8, 2006
    Shooter:
    35mm
    All sorted now..........pulled out thermostats,cleaned and resealed with silicone sealant. I'll wait 24 hours before refilling with water and check for leaks.

    regards
    rizla
     
  3. Muihlinn

    Muihlinn Member

    Messages:
    302
    Joined:
    Jun 23, 2005
    Location:
    Olías del Re
    Shooter:
    Multi Format
    Contact to Stewart Band at nova, he will give you the right directions to seal it as they do it there.