Thanks for the help with my previous thread about where to start the film, but it seems I've got another (and a bit more complicated) problem. It appears my infinity focus adjustment is off, and did what homework I could. I know I have to adjust the screw on the rangefinder roller arm, and shaved down and bent a screwdriver for the purpose. I know I'm not supposed to press down (upwards) on the arm, and I was even a bit naughty and applied a bit more force than some might approve of I've had no luck in getting the thing to turn, but that being said, is there a known direction to turn it in? My error is such that the ghosted image (the one you move by turning the lens) never reaches the infinity overlap, which I believe would be backfocusing? Again, thanks in advance for the wealth of knowledge you guys provide!