Lens board for Cambo View Camera

Discussion in '[Classifieds] Want to Buy' started by nsurit, Feb 28, 2011.

  1. nsurit

    nsurit Subscriber

    Messages:
    1,481
    Joined:
    Jan 27, 2005
    Location:
    Texas Hill C
    Shooter:
    Multi Format
    Specifically need one for a Copal #3 and/or that would fit an #4 Acme Synchro (approx. 2.5" hole). Would also be interested in others. What do you have? Thank you, Bill Barber
     
  2. BrianShaw

    BrianShaw Member

    Messages:
    6,737
    Joined:
    Nov 30, 2005
    Location:
    Los Angeles,
    Shooter:
    Multi Format
    I went through that exercise recently. Cambo did not make a board to fit the Acme Synchro so you'll need to have the hole machined larger. Given that, it might not matter what size you start with but cola 3 hole will require less machining htan a smaller hole.
     
  3. gordrob

    gordrob Subscriber

    Messages:
    452
    Joined:
    Jan 29, 2005
    Location:
    Western Cana
    Shooter:
    Multi Format
    Hi Bill
    I have a grey Cambo board with a 2.5" hole. Board is 6 3/8" square. The board has 3 small threaded holes that looks like it had a retaining ring attached at one time. If you are interested let me know
    Gord