Lensboard drilling tool...

Discussion in '[Classifieds] For Sale' started by Reinhold, Apr 2, 2013.

  1. Reinhold

    Reinhold Subscriber

    Messages:
    745
    Joined:
    Aug 20, 2003
    Location:
    Washougal, W
    Shooter:
    Multi Format
    Here's something a bit different...

    ... A Birdcage Awl ...
    An age-old technique re-invented for the large format photographer.
    A few twists creates a tapered hole to match the taper of #4 to #7 screws.
    Avoids wood splitting, no raised ridge around the screw.
    The lens seats squarely against the lensboard.
    You could make your own. But if you'd rather not, here's a nice one...

    Compact, 135mm (5") long.
    Hard, long wearing stainless A2 alloy tool steel point.
    Genuine cherry hardwood handle and sheath.

    Simple, compact and easy to use, keep it in your "field service" toolkit.
    For Wood, plywood, "Masonite" or plastic (PVC/ABS) lens boards.
    Not suitable for metal or composite (fiberglass) lensboards.

    $17.50, postpaid in US, ($18.50 to Canada, $19.50 to Europe and Australia/Asia).

    Reinhold
    www.Re-inventedPhotoEquip.com

    Photo 1 is finished product, (2&3 were prototypes).
     

    Attached Files:

  2. Randy Moe

    Randy Moe Member

    Messages:
    247
    Joined:
    Dec 14, 2011
    Location:
    Midwest USA
    Shooter:
    Multi Format
    What I need is a simple lens board lens hole boring tool, my Dremel takes forever with the circle attachment...

    Maybe I need a real router, and a table, but what do I do with all that damn dust?

    Tools, never too many.

    You have inspired me. fwiw