lensboard hole size for a Componon-S 5.6 135mm

Discussion in 'Enlarging' started by JeffD, Jan 4, 2005.

  1. JeffD

    JeffD Member

    Messages:
    308
    Joined:
    Aug 29, 2004
    Location:
    Atlanta, GA
    Shooter:
    4x5 Format
    Hello,

    I recently was given an enlarger (Beseler 45mcrx) and have a schneider-kreuznach Componon-S 5.6 135mm I would like
    to use with it. The lens diameter is to wide to fit in the lens boards that came with the enlarger.

    Can anyone tell me what size hole I should be looking for when looking for a lensboard to mount this in? Any ideas where I could get such a lensboard? :smile:

    Thanks!
     
  2. Nick Zentena

    Nick Zentena Member

    Messages:
    4,677
    Joined:
    Nov 21, 2004
    Location:
    Italia
    Shooter:
    Multi Format
  3. blaze-on

    blaze-on Member

    Messages:
    1,430
    Joined:
    Nov 30, 2004
    Location:
    Riverside, C
    Shooter:
    Multi Format
  4. paul ron

    paul ron Member

    Messages:
    1,896
    Joined:
    Jan 22, 2004
    Location:
    NYC
    Shooter:
    Medium Format
    Mine is @ 39mm, unthreaded, I use a jam nut. I have a 23CII 4"x4" lens board.

    Try measuring it? I am sure B&H has exactly what you are looking for.
     
  5. blaze-on

    blaze-on Member

    Messages:
    1,430
    Joined:
    Nov 30, 2004
    Location:
    Riverside, C
    Shooter:
    Multi Format
    oops

    Thought it was for lensboards on LF cameras...disregard my previous post.