LIght Leaks

Discussion in 'Large Format Cameras and Accessories' started by lallan, Mar 8, 2004.

  1. lallan

    lallan Member

    Oct 3, 2003
    Hi all,

    Trying to find why I am getting extra density in my negatives I climbed inside by old 8x10 Ansco with a flashlight looking for that bad holder. Nice ASSumption, but wrong. As it turns out, I have light leaks at the wood seam between the rear standard assembly and the film holder as well as between the lens board (lens board is thin plywood) and the front standard assembly. Am I looking at a lot of sanding to get the surfaces to meet properly or is there some gasket (tape, felt, whatever) that will work. Thanks for all your help.

  2. Ed Sukach

    Ed Sukach Member

    Nov 27, 2002
    Ipswich, Mas
    Medium Format
    Uh... TIG welding? Maybe railroad spikes? Wait... I remember - a while ago I read an article about "Explosion Forming", where they place the "formee" on a die in a reinforced chamber - very reinforced... in fact *MAJOR** reinforced... and fire an explosive charge to blow everything into place. Or... dip soldering ......

    Oh, lord... I just had an awful thought ... PLEASE don't take this seriously.

    Written under the influence of Mr. J. Beam.
  3. Ole

    Ole Moderator Staff Member Moderator

    Sep 9, 2002
    Bergen, Norw
    Large Format
    My Linhof color had a persistent, but intermittent light leak along the long side of the negative. It turned out that a strip of velvet was missing from one side of the back. Bought a new velvet ribbon piece in a local shop, glued it on : Voila - no more light leak!
    It's amazing what can be fixed with a 50 cent piece of black velvet.