Light retrofit for Durst 138S

Discussion in 'Enlarging' started by Donald Miller, Jan 27, 2006.

  1. Donald Miller

    Donald Miller Member

    Messages:
    6,242
    Joined:
    Dec 21, 2002
    Shooter:
    Large Format
    This post is intended as a service for those who have and use the Durst 138S enlarger and are confronting the demise of the Thorn lamp for this enlarger.

    I have developed an alternative retrofit using a 1000 watt lamp for this enlarger. My results with the higher wattage lamp have been very good and result in greatly reduced printing times from those experienced with the 250 watt lamp.


    You may message me if you are interested in learning the details of this.