I just bought a Daylabii and was very frustrated with trying to figure out how to load a film pack into the base. I ruined the first pack because the second picture I attemted failed to come through the rollers and smeared the rollers with goop. The second pack was easier to load and I experimented with various filter settings to try and get a decent but on the fifth try the print messed up the samee way as it did with my first film pack. That was my last film pack. I still don't know what went wrong. I'm thinking about getting a 4x5 base as it seems to be a bit more straight forwar in the loading process. Also, the slide I was trying to print did not print well and I think that k64 is not saturated enough to print well let alone trying a film or emulsion tranefer. Any suggestions ?