Loersch Minityper info (slide imprinter)

Discussion in 'Darkroom Equipment' started by frobozz, May 29, 2010.

  1. frobozz

    frobozz Subscriber

    Messages:
    1,358
    Joined:
    Feb 19, 2010
    Location:
    Mundelein, I
    Shooter:
    35mm
    I guess a slide imprinter is sort of "Darkroom Equipment" right? I didn't see a better forum.

    I picked up one of these cheap and am wondering if anyone has any info on it - manual, software, ribbon cross-reference, anything (it has no ribbon in it, drat.)

    I tried emailing the US arm of Loersch and they seem to have gone away, as the domain name no longer works. I emailed the main place in Germany and we'll see if they even respond to me, but in the meantime I thought I'd ask here.

    Thanks,
    Duncan
     
  2. compix-usa

    compix-usa Member

    Messages:
    2
    Joined:
    Oct 28, 2010
    Shooter:
    35mm
    Loersch Minityper

    Hi Duncan

    I had a couple of these machines when I ran Compix Photo Agency in Miami. When I allegedly retire a few years ago, I kept one machine for my own use and it's still humming right along.

    It's a very good machine but can be temperamental. They seldom really break down. When they stop it's usually because of dust on the slide sensor. They were designed to be used with Loersch plastic mounts (the worst on the planet) and when you use paper mounts - which I did for 20 years - dust gets swept down the sensor hole in the track (underneath the black plastic square near the chute) and blocks the signal.

    This problem was not helped by the idiot who wrote the software for these machines - a German guy whose knowledge of English could be written on a pinhead. Once you figure out what he's trying to say it's OK but at first it's a bit like trying to crack a safe.

    The ribbons are a simple calculator ribbon and can be found almost anywhere - even Office Depot. Star Manufacturing (which made the entire print head assembly) makes them and the part number is: SF01B for Star DP8340, DP 832-834. Unicorn Ribbon also makes them: #GR24.

    They cost about $1.25. Or you can get the same thing in a different box from Loersch for $16. They all come from China these days.

    Anyway, if your still looking for help and have not chucked the machine in the dumpster in desperation, let me know. I'll be happy to help.

    Alan
     
  3. AgX

    AgX Member

    Messages:
    11,554
    Joined:
    Apr 5, 2007
    Location:
    Germany
    Shooter:
    Multi Format
  4. plettplett

    plettplett Member

    Messages:
    1
    Joined:
    May 27, 2011
    Shooter:
    35mm
    hello alan

    any chance of you wanting to part with your loersch minityper?

    thank you
     
  5. compix-usa

    compix-usa Member

    Messages:
    2
    Joined:
    Oct 28, 2010
    Shooter:
    35mm
    Hi Plettplett

    I'm afraid that I couldn't part with it yet. I use it all the time 'cos I remount and reprint after I drum scan everything. If only I could find some other software to run it besides this junk from Loersch, life would be so much easier. After all these years, it still drives me crazy. I'd even settle for a Windows version of the Loersch software WITHOUT the "double strike" and extra large type glitch in it. But even Loersch doesn't seem to have ever had that. Even though they are no longer in the Minityper business, they were kind enough to send me their latest but it doesn't work any better than mine does. I remember 20 years ago there was a guy in New York who wrote his own program but I lost track of him long ago.

    Cheers,

    Alan