Mamiya RZ67 PRO-II Kit (LN)

Discussion in '[Classifieds] For Sale' started by wallrat, Dec 7, 2012.

Thread Status:
Not open for further replies.
  1. wallrat

    wallrat Member

    Messages:
    39
    Joined:
    Nov 12, 2010
    Location:
    Modesto, Cal
    Shooter:
    Multi Format
    I bought all of this used in LN or better condition. The 50mm lens was purchased brand new. I have all hoods, caps, etc. Everything is in perfect working order and has been stored in a Pelican case since I bought it. I treat all my gear as if it were my child! I shot no more than 2 dozen rolls through this camera. The 50mm lens has been used less than 12 times. This is as new equipment.

    RZ67 PRO-II w/ Waist Level Finder (matte focus screen in finder)
    Extra grid focus screen
    120 PRO-II back
    Polaroid RZ PRO back <- Uses fp-100C or fp-3000B but only 6x7cm of it
    90mm 3.5 W
    50mm 4.5 W

    $840 net to me includes USPS Flat Rate, you pay actual shipping of your choice if you want other method and I'll deduct the cost of the USPS from your choice. Paypal or Bank Check / Money Order. I ship after money clears my bank.

    I'll post pictures this evening when I get off work. Everything looks brand new except the Polaroid Back which I would rate a KEH EX or EX+

    I have ebay feedback as well as references from Large Format Forum.

    Questions welcome and thanks for looking,

    -Bill
     
    Last edited by a moderator: Dec 7, 2012
  2. kelvinleung

    kelvinleung Member

    Messages:
    21
    Joined:
    Mar 31, 2010
    Location:
    Arizona
    Shooter:
    Medium Format
    very good deal!
     
  3. wallrat

    wallrat Member

    Messages:
    39
    Joined:
    Nov 12, 2010
    Location:
    Modesto, Cal
    Shooter:
    Multi Format
    Thanks for the support. I easily have $1200 in this and entered large format about 6 months after buying it. I want to use the money toward graflock backs (6x7, 6x9, 6x12) so I would consider partial trades for roll-film graflock backs as well.
     
  4. Myxine

    Myxine Member

    Messages:
    100
    Joined:
    Mar 7, 2011
    Location:
    New Orleans
    Shooter:
    Multi Format
    I can vouch for Will, he an awesome guy.

    edit: just noticed how silly i am to write that considering i have absolutely not contributed to the forum before :smile:

    Arnaud
     
    Last edited by a moderator: Dec 7, 2012
  5. wallrat

    wallrat Member

    Messages:
    39
    Joined:
    Nov 12, 2010
    Location:
    Modesto, Cal
    Shooter:
    Multi Format
    Ah, you have cred at LFF too. Just like you, I'm just now finding time for APUG now that LFF is slowing down a bit :smile: Everyone has to start somewhere!
     
  6. asianbeer

    asianbeer Member

    Messages:
    2
    Joined:
    Dec 8, 2012
    Shooter:
    Multi Format
    Still looking for a 6X7 and 6X12 roll back ?? I have both in very good condition with manuals - no box. I'd have to think of a price. Know the 6X12 run from $350 and up , but don't have a clue about the 6X7. If interested I'll come up with a price. Need any 4X5 film backs. Have those too .Brian
     
  7. asianbeer

    asianbeer Member

    Messages:
    2
    Joined:
    Dec 8, 2012
    Shooter:
    Multi Format
    How do u place a classified add on APUG ? Can't seem to see any side bar for that ??
     
  8. brucemuir

    brucemuir Member

    Messages:
    2,266
    Joined:
    Dec 25, 2007
    Location:
    Metro DC are
    Shooter:
    Multi Format
    welcome will, good luck with the awesome deal you have going here!
     
  9. brucemuir

    brucemuir Member

    Messages:
    2,266
    Joined:
    Dec 25, 2007
    Location:
    Metro DC are
    Shooter:
    Multi Format
    You need to be a subscriber first and then go into the classified tab and take it from there to the appropriate category.
     
  10. wallrat

    wallrat Member

    Messages:
    39
    Joined:
    Nov 12, 2010
    Location:
    Modesto, Cal
    Shooter:
    Multi Format
    asianbeer, I will send you a pm tonight on that. I am interested for sure. I am sorry I haven't posted pictures yet but I promise to tonight. I have to put up the Christmas lights today as we have had nonstop rain for 3 weeks!
     
  11. wallrat

    wallrat Member

    Messages:
    39
    Joined:
    Nov 12, 2010
    Location:
    Modesto, Cal
    Shooter:
    Multi Format
    Here are pictures taken less than an hour ago. I noticed during the picture taking that the body has light paint missing around the edges of the shutter button and cocking lever. There is also about a 1/8" x 1/16" ding in one edge of the wlf. I double checked and I bought this from KEH as LN-. I'll leave it up to you but I think my price is more than fair for a camera in 2/3 the condition of this one. I'm just trying to be completely open. I never noticed them until I got it under the bright lights of the light tent. So, here goes pictures. There are 14 of them attached. Please ask any me any questions you may have.

    Edit: Sorry for the dust but this time of year it's awful. I sprayed everything with canned air but the dust was back the second I quit. If you are concerned that something in the image is a blemish and not dust, please as I would be happy to double check and even reshoot the image if necessary. I saw nothing I did not disclose.

    Thanks,
    -Bill
     

    Attached Files:

  12. wallrat

    wallrat Member

    Messages:
    39
    Joined:
    Nov 12, 2010
    Location:
    Modesto, Cal
    Shooter:
    Multi Format
    I have received a couple of questions regarding lenses. I'll post them here as well:

    1. Can you use RB lenses on this RZ body? Yes, you definitely can. The shutter speed dial on the camera has an "RB" setting to facilitate that. It them relinquishes control to the lens for setting the shutter speed. For RZ lenses, only the aperture is set on the lens. While the shutter is still in the lens, the setting happens on the camera. RB lenses, however, have a shutter speed dial on the lens.

    2. What is the difference between lens x and your lens y? What is the max magnification of lens x? See the Mamiya Lens Chart (Note that some of the links in this chart are broken but the information in this chart isn't compiled this well anywhere else on the internet that I can find)

    3. Do you have the lens caps and hoods? I didn't see the caps in the picture and the 50mm isn't shown with the hood. Yes, I have all caps and hoods for the body and lenses. The 50mm lens uses a slip-on hood which also works with a few other lenses. I photographed the lens sitting in it's hood as putting the hood on covers the lens information at top of the lens.

    4. Are there any issues at all with the lens glass? No, not a single scratch, nothing. I dont see any internal dust either. I purchased the 50mm brand new from KEH last year.

    Also, I have the boxes for some of the gear. I know I do for the 50mm lens and I believe also for the 90mm. I also have an extra Grid focus screen which was mentioned above but was not shown in the pictures.
     
  13. wallrat

    wallrat Member

    Messages:
    39
    Joined:
    Nov 12, 2010
    Location:
    Modesto, Cal
    Shooter:
    Multi Format
    One more thing, the free USPS shipping is within the US. The difference will be applied to other methods as stated previously.
     
  14. wallrat

    wallrat Member

    Messages:
    39
    Joined:
    Nov 12, 2010
    Location:
    Modesto, Cal
    Shooter:
    Multi Format
    This is SOLD!
     
Thread Status:
Not open for further replies.