I'm going through the collection of cameras I recently inherited. I found a Kodak Ektra in good condition. The camera could stand a good cleaning but it is in good condition and it all seems to work. It's got 3 lenses. (35mm, 50mm and 90mm) It's got a plain leather case plus there is the larger Combination Case for it. From my studies, I have learned that the shutters on these cameras can go bad but everything on this camera seems to be working. I'm going to run a roll or two of film through it just to see how well it works. Plus, I just want to try it out. Yes! I'll be careful with it. When I'm done with it, I'll put it up and keep it safe. After this, I'll only take it out on occasion, either when I have an extra special reason to use it or for show. Other than that, this camera is for the collection. I've done some research on the internet. I've read some articles at Camerapedia and places like that but there's very little details on the operational details. I do have the manual. I hear stories of people saying that the shutters go bad. What is is about the shutters that go bad? I suppose this camera could use a good cleaning. Who are good people to work on cameras like this? What should I expect to pay to have the camera CLA? Aside from the general advice, "Don't use it too often." and "Be careful when you use it," are there any operational details to watch out for? For instance, I know that you should not try to set the shutter speed unless the shutter is cocked or else you could hurt the camera. I know that you should be careful when you operate the winding lever. Use a smooth, "positive" action but be careful not to press it too hard or work it too fast. Is there anything else you can tell me? T.I.A!